How to Tell if Steel Bars Are Genuine: KEBS Marks, Rolled Markings and Weight
Substandard steel looks exactly like good steel. These three checks take ten minutes and catch most problems.
By Safeworld Steel Desk, SAFEWORLD STORES LTD
No one can tell a bar's yield strength by looking at it. But substandard steel usually gives itself away in other ways, and in Kenya you have three checks that take minutes.
Check 1: the rolled marking
Kenyan mills roll a mark into the bar at regular intervals: an identifier for the maker, the bar size, and the grade. Tononoka's catalogue shows a D12 marked "TNK 12 B500", for example. Look along a few bars from the bundle:
- Is there a maker's mark at all?
- Does the size in the mark match the size you ordered?
- Is the grade there (B500)?
A bundle of unmarked bars with no paperwork is a reason to ask questions.
Check 2: the KEBS permit
Steel bars sold in Kenya should carry a valid KEBS Standardization Mark permit. KEBS lets you check one quickly:
- SMS "SM#" followed by the permit number to 20023
- use the KEBS app, or
- call 1545.
Permits do get suspended. In January 2025, KEBS suspended Rongtai Steel's permits, seized its ribbed bars and ordered a recall. A valid permit last year does not prove a valid permit today.
Check 3: the weight
This is the check most buyers skip, and it is the one that catches light-rolled steel. Every bar size has a nominal weight, and mills are allowed only a small tolerance:
| Bar | Nominal weight per 12 m | Lower limit at −4.5% |
|---|---|---|
| D10 | 7.40 kg | ≈ 7.07 kg |
| D12 | 10.66 kg | ≈ 10.18 kg |
| D16 | 18.94 kg | ≈ 18.09 kg |
| D20 | 29.59 kg | ≈ 28.26 kg |
(For 8 mm bars Tononoka lists a ±6% tolerance, so a D8 should weigh at least about 4.46 kg.)
You don't need a weighbridge. A hanging scale or platform scale and three or four bars picked from different parts of the bundle are enough to show whether the steel is full weight.
Why underweight bars are a real problem
A D12 rolled 8% light is not "almost a D12". It has 8% less steel holding the slab up, and your engineer's design assumed full-weight bars. It is also why a suspiciously cheap quote per bar can be the expensive option per kilo.
Paperwork to ask for
- An invoice that states bar size, quantity and grade.
- The mill certificate for the batch, on request, for larger orders.
- The supplier's name on the delivery note.
We are happy for you to weigh any bar we deliver. See our steel bars.
Sources: Streamline Feed, Buying building materials in Kenya: standards and fakes; Tononoka Steels catalogue.
Quick answers
- How do I check a KEBS permit for steel?
- SMS SM# followed by the permit number to 20023, use the KEBS app, or call 1545.
- How much should a D12 bar weigh?
- About 10.66 kg for a 12 m bar. Below about 10.2 kg it is outside the ±4.5% rolling tolerance.
Know the sizes you need?
Send them on WhatsApp or through the quote form and we will reply with today's price and delivery from Syokimau.
